Chippers, Chain Saws and Brush Cutters


If you need a brush cutter to trim around trees, brushes or shrubbery, a chain saw to cut them down or a chipper to make them into mulch, this month’s product focus is ready to help fight back the woody forces encroaching your turf.

Simply circle the reader service numbers for the products you’re interested in, send in the free, postage-paid card and, in a few weeks, you’ll receive all the information you need.

For INSTANT FREE information on the companies featured here, visit


Swampy Hollow

The S.H.M. Model WC5500 has a hydraulically operated feed system that can be run by tractor hydraulics or by an available, optional, self-contained hydraulic system.


The model 3090 track chipper has a 30-inch capacity, joystick controls, heat and air conditioning units, babbitted knives and diagonal dual top feed wheel system.

BCS America

The BCS Bio 100 shredder-chipper attachment processes 3-inch diameter limbs, weighs 211 pounds and includes 28 swinging flails to efficiently shred materials.


The SC262-18VEMC Chip-N-Shred has a 4-inch chipping system and 48 free-swinging, reversible hammers. Powered by an electric-start, 18 hp Vanguard engine.


The 5900EL features an 11-foot feed deck, PT Tech hydraulic clutch, direct drive for the internal feed rolls and totally enclosed Cat C18 engine.


The Wood-Pro 25Qi is powered by a twin-cylinder, 16 hp Vanguard engine and processes any type of vegetation through a triple reduction process.


The model 730 has an infeed opening measuring 13 by 18 inches, allowing material to be processed with less trimming. Weighs about 5,200 pounds.

Chain Saws


The 50cc PS-5105 generates 2.8 kilowatts of power, runs at 14,500 RPM, weighs 11.2 pounds and features an ergonomic design and instant acceleration.


The T435 is equipped with an X-Torq engine, two clamping hooks, Smart Start, auto-return stop switch and LowVib to reduce the vibrations of the handle.

Cub Cadet Commercial

The CS 3916 has a 16-inch commercial-grade bar, anti-vibration handle, inertia chain brake, no-tool access to air filter and spark plug, and variable automatic oiler.


Chain saws emit no carbon and come standard with Oregon bars. They come in 9-amp, 14-inch; 12-amp, 16-inch; 13-amp, 18-inch; and 10-inch pole saw models.


The G5300 limbing saw includes the MaxLogic ignition system for quick starts and a 3.3 hp, 53cc engine. It can accommodate 16, 18 and 20-inch bars.


The 643-IP features the EasyStart system, aluminum handle, anti-vibration system, intelligent engine management and 2.7 hp, 40.2cc, two-cycle engine.

Brush Cutters


The 327Rx is equipped with an E-TECH II engine, ergonomic double harness, angled handlebars, Smart Start, LowVib and reinforced spark plug guard.

Turf Teq

The 1305BC features a 13 hp Honda engine and is self-propelled with a hydrostatic transmission. The deck pivots incrementally and has adjustable cutting height.

Billy Goat

The Outback is a 24-inch model that clears brush up to 6 feet high and up to 2 inches in diameter. The heavy-duty blade spindle is reinforced in all directions.


Brush cutters for skid steers come in 60 and 72-inch standard-flow and 60, 72 and 78-inch high-flow models. With high deck clearance and flow control baffle.

Brown Products

The Brush Ox BC2613HER is a self-propelled, 26-inch model powered by a 13 hp Honda engine. With Hydro-Gear hydrostatic drive and Quadro Cut blade system.

Kuhns Power Equipment

The Power Dog 926 comes with a hydro drive featuring instant forward and reverse and variable speed on the go. The revolving deck spins on a ball bearing.

Land Pride

The RCR18 Series rotary cutter for 20 to 50 hp tractors comes in 60 and 72-inch cutting widths with a floating, fully welded deck and 1-inch cutting capacity.


The EM4250 has a 24.5cc, four-stroke engine, mechanical automatic engine decompression and steel driveshaft for less vibration and longer life.


The model 142 features a double shoulder harness, anti-vibration system, high RPM cylinders, thin cooling fins, full-forged crankshaft and 23.7-fluid-ounce fuel tank.


The HQ680 Tough Cut mower has three heavy-duty blades, tilt-up deck for easy access to blades, 68-inch cut width and cutting heights of 3, 3 5/8 and 4.25 inches.

W.E. Chapps

Brush Chapps feature a one-piece belted design, custom foam pads and tough Cordura nylon exterior shell that provides excellent tear, snag and abrasion resistance.

Don’t miss the August issue of Turf, with product focuses on Sod Equipment; Topdressers, Spreaders and Seeders; and Blowers and Vacs.