If the areas you mow are measured in acres, or yourjobs require material by the bucket load, a compact tractoris the piece of equipment you need. This month’sproduct focus features companies who are ready andwilling to equip you with the right tools for your job.We’ve also included attachments that make an alreadyflexible tool even more so.

For more information on any of the products listed,just complete the enclosed reader service card and mailit out to us. We even pay the postage!

Cub Cadet Yanmar

Lx Series
•    Engine: 41, 45 or 48.5 hp
•    Trans.: Gear-driven
•    PTO: Electrohydraulic independent
•    Feature: Performance Link Technology


CK Series
•    Engine: 22 to 35 hp
•    Trans.: Mechanical or hydrostatic
•    PTO: Rear standard; mid optional
•    Feature: 360-degree visibility of job site


•    Engine: 31 hp
•    Trans.: Hydrostatic
•    PTO: Electric
•    Feature: 43-inch turning radius


•    Engine: 38 hp
•    Trans.: Semisynchronized
•    PTO: Independent; 28.5 hp
•    Feature: 12 forward and 12 reverse gears

Branson Tractors

•    Engine: 35 hp
•    Trans.: Fully synchronized
•    PTO: Independent; 29 hp
•    Feature: Easy-open hood

John Deere

•    Engine: 43 hp PowerTech
•    Trans.: PowrReverser; 12F/12R
•    PTO: Standard rear, 540 RPM; optional mid
•    Feature: LoadMatch feature


•    Engine: 31.9 hp
•    Trans.: Gear drive or hydrostatic
•    PTO: Rear
•    Feature: Slanted hood, foldable ROPS

Massey Ferguson

•    Engine: 25 hp Iseki diesel
•    Trans.: Three-range hydrostatic
•    PTO: Rear 540 RPM; mid optional
•    Feature: Category I three-point hitch

New Holland

Boomer 30, 35, 40 and 50
•    Engine: 28 to 47 hp
•    Trans.: Gear or hydrostatic
•    PTO: Electrohydraulic independent
•    Feature: High-capacity hydraulic system


T723 PS
•    Engine: 74 hp diesel
•    Trans.: Sync/Power Shuttle
•    PTO: 65 hp at 2,200 RPM
•    Feature: Heated, air-conditioned cab


Pallet forks are rated at 2,000 pounds for optimal lifting capacity. Spring-loaded latches allow the operator to move the forks along notched rails for spacing adjustment.


The rear-mounted tiller comes in three models with skid shoes that adjust to allow for various cutting depths up to 7 inches. The tillers cover the tractor’s tire tracks.


The model J20/80 PTO digger is designed for Category I or II tractors with 20 to 80 hp. Augers range from 4 to 24 inches in diameter.

Land Pride

The RTR20 Series reverse-till rotary tiller comes in 64 and 72-inch cutting widths with adjustable offset up to 18 inches and 17-inch rotor swing diameter.

R.L. Parsons

The 146KL-FM Micro-Mower offers a choice of four cutting heads, floating arm and head, excellent visibility and easy on/off capability.


The SP-1575 has a 5.25-cubic-foot capacity hopper and simple two-stage auger system that assures a steady feed of material to the spinner without clogging.


The Plugr VersaTow is a pull-behind aerator with 12-inch self-storing wings on each side of the 36-inch main frame, allowing operation at 36, 48 or 60-inch widths.


The Edge-N-Blow’s edger component quickly mounts to most tractor buckets, while the PTO-driven blower component mounts to a three-point hitch.


Offers a line of Groom ‘N’ Sweep broom attachments that are designed to mount on a variety of service vehicles to remove debris and groom lawns.

York Rakes

The Model RW landscape rake is available in 6, 7 and 8-foot working widths and attaches to Category I three-point hitches and Category I quick hitches.

www.yorkmodern.comCheck out the May issue of Turf, with a focus on Software, Hydroseeders and Utility Vehicles and Attachments.